Bag-in-tank The specific advantages of the bag-in-tank have led to it being increasingly adopted by microbreweries and brewpubs. This popularity is partly due to the fact that the beer retains its flavour longer after bei...
An quick view of the first generation chiller and second generation chiller Today, a customer from USA asked me that if we can change our chiller piping to copper line. The glycol system where is possible to use the coppe...
Turbine flowmeter and electromagnetic flowmeter in brewery During the brewing process, some brewmaster would like to have the flow meter to learn the flow or quantity of wort, brewing water or beer for monitoring/tax/tran...
The second generation chiller The 2nd Generation introduced the external, shell and tube chiller evaporator. Although commonly used on higher temperature air conditioning systems, the manufacturers were hesitant to approv...
The Third generation Chiller 1.Two Pump Glycol Design. The two pump design simply provided constant flow through the chiller evaporator at all times. With a dedicated Circulation Pump (Pump 1) the highest evaporator effic...
The advantages of the second generation chillers In the first generation of chillers, the Freon needs to goes out from the chiller to the Glycol Water Tank through copper piping. Now we are using the second generation, by...
The laser cut filter in the Mash Lauter tun The laser cut filter in the Mash tun, was a bit weak and when full it flexed allowing grain to pass through. It also rested on the vessels sloping bottom. What has been done to ...
Ensure that the correct type of cable is sent with the system About the cable, as you know, different countries and areas have different requirements about the wires, like in China four wires(three fire wire and one Zero ...