+86 531 88161066

News&Blog

Sep 26, 2016
helen
Click

Tiantai-made Lager Beer Ready For Drinking

Tiantai-made Lager Beer Ready For Drinking One of our customer from Europe ordered one turnkey set of 300L system a few months ago, according to customers requirements,we made a test brew with his beer equipment in our wo...

Sep 26, 2016
helen
Click

The Third generation Chiller

The Third generation Chiller 1.Two Pump Glycol Design. The two pump design simply provided constant flow through the chiller evaporator at all times. With a dedicated Circulation Pump (Pump 1) the highest evaporator effic...

Sep 24, 2016
helen
Click

The advantages of the second generation chillers

The advantages of the second generation chillers In the first generation of chillers, the Freon needs to goes out from the chiller to the Glycol Water Tank through copper piping. Now we are using the second generation, by...

Sep 23, 2016
helen
Click

The laser cut filter in the Mash Lauter tun

The laser cut filter in the Mash Lauter tun The laser cut filter in the Mash tun, was a bit weak and when full it flexed allowing grain to pass through. It also rested on the vessels sloping bottom. What has been done to ...

Sep 23, 2016
helen
Click

1000L stainless steel beer equipment during delivery

1000L stainless steel beer equipment during delivery One turnkey set of 1000L beer brew equipment just finished final test in our workshop this week, now all the tanks were finished cleaning and waiting on delivery. This ...

Sep 22, 2016
helen
Click

Ensure that the correct type of cable is sent with the system

Ensure that the correct type of cable is sent with the system About the cable, as you know, different countries and areas have different requirements about the wires, like in China four wires(three fire wire and one Zero ...

Sep 21, 2016
helen
Click

Turnkey 30HL Commercial Beer Brewery During Delivery

Turnkey 30HL Commercial Beer Brewery During Delivery After several months trying, the turnkey 3000L stainless steel beer brewing equipment finally finished and delivered. This beer brew system was customized for one domes...

Sep 20, 2016
helen
Click

Does the fixed pressure valve also needed if I use spunding valve?

Does the fixed pressure valve also needed if I use spunding valve? Some customers from Europe may prefer to use the spunding valve which the brewmaster can adjust the pressure of the valve by themselves. Then the question...