We believe strongly that we can and must do something different.
Our aim is to make your ideas come true.
Brewery Setup Blog
What Causes Rust on Beer Brewing Equipment
- May 13, 2016
- helen
- 7998
- stainless steel fermenter
What Causes Rust on Beer Brewing Equipment
Normally, the beer brewing equipment is made by stainless steel 304 or 316.
For stainless steel 304 and 316, as we all know, it is corrosion resistant because there is a high percentage of chromium. But, sometimes, we would see rust on the equipment’s surface, mainly around the welding. What causes rust on the stainless steel?
In fact, the rusting phenomenon is surface phenomenon only. After welding and polishing, although the weld surface may look clean, there is a thin residual layer of iron material on the surface. And, while storing and packaging the equipment in the factory, the equipment is possible to touch some other iron inevitably. The iron will rub off onto the stainless steel surface, and, after exposure to moisture in the atmosphere for a few days, it will form some rust. Although the rusted surface looks bad, the chromium in the stainless steel under the rust film forms a suitable corrosion-resistant oxide layer, and further corrosion does not continue.The rust will disappear after the usual cleaning. Therefore, you do not need to worry about this issue too much. The rust on the beer brewing equipment is not the phenomenon we expect, but it is easy to remove and would not do harm to the equipment.
Thanks very much for your reading. If you have any comments or doubts, please contact us freely. We look forward to receiving your feedback.
Edited by Vicky
Sales Manager
Email: [email protected]
Skype: tiantaisale5
Normally, the beer brewing equipment is made by stainless steel 304 or 316.
For stainless steel 304 and 316, as we all know, it is corrosion resistant because there is a high percentage of chromium. But, sometimes, we would see rust on the equipment’s surface, mainly around the welding. What causes rust on the stainless steel?
In fact, the rusting phenomenon is surface phenomenon only. After welding and polishing, although the weld surface may look clean, there is a thin residual layer of iron material on the surface. And, while storing and packaging the equipment in the factory, the equipment is possible to touch some other iron inevitably. The iron will rub off onto the stainless steel surface, and, after exposure to moisture in the atmosphere for a few days, it will form some rust. Although the rusted surface looks bad, the chromium in the stainless steel under the rust film forms a suitable corrosion-resistant oxide layer, and further corrosion does not continue.The rust will disappear after the usual cleaning. Therefore, you do not need to worry about this issue too much. The rust on the beer brewing equipment is not the phenomenon we expect, but it is easy to remove and would not do harm to the equipment.
Thanks very much for your reading. If you have any comments or doubts, please contact us freely. We look forward to receiving your feedback.
Edited by Vicky
Sales Manager
Email: [email protected]
Skype: tiantaisale5
Previous News & Artical
The advantages of two body-three vessels brewhouse
Do something for your dream.
Start from selection
Location
CN Jinan- 2668
Jichang Rd.
Email Us
Call Center
24/7 Support
+86 531 88161066
Request A Quote